About Our Products

CanvasTac

Presto Tape’s CanvasTac is a 17 mil digitally printable canvas substrate with a removable and respositionable microsphere adhesive. Some of its key features include: 

• Adheres to virtually any non-porous surface and is removable 99% residue-free
• Does not peel paint or damage walls
• Compatible with UV, latex, solvent, and eco-solvent inks
• Available in matte and gloss finishes
• Opaque
• Easily contour cut without any fraying
• Does not rip, wrinkle, shrink or curl
• Thick material allows you to hide wall blemishes/damage
• Adheres when applied over wallpaper
• Made in the USA
• PVC free
• Available in Gold Iridescent and Silver finishes
• CanvasTac is a Category VI Type III Wallcovering. It is also UL tested for safety (ICC IBC (2012) 803.1.1 Class A finish material compliant.) 

PrestoTex

Presto Tape’s PrestoTex is a 7 mil digitally printable polyester fabric with a removable and respositionable microsphere adhesive.  Some of its key features include:

• Adheres to virtually any non-porous surface and is removable 99% residue-free
• Does not peel paint or damage walls
• Compatible with UV, latex, solvent, and eco-solvent inks
• More opaque than competitors’
• Easily contour cut without any fraying
• Does not rip, wrinkle, shrink or curl
• Made in the USA
• PVC Free
• Available in Gold Iridescent and Silver finishes

Product Performance & Safety Declaration:

A. ICC IBC (2012). The Self Adhesive, Woven Polyester Wall Graphic Media meets or exceeds the requirements as a Class A material as specified in ICC IBC (2012) Section 803.1.1. The material was tested under UL723/ASTM E84 requirements and procedures.

B. NFPA101. The Self Adhesive, Woven Polyester Wall Graphic Media meets or exceeds the requirements as a Class A material as specified in NFPA101 10.2.2.4. The material was tested under UL723/ASTM E84 requirements and procedures.

C. ASTM F793-10a. The Self Adhesive, Woven Polyester Wall Graphic Media meets or exceeds the requirements as a Category VI, Type III Commercial Serviceability Class A material as specified in ASTM F793-10a 5.5.6. The material was tested under ASTM D751-06 Test Methods of Coated Fabrics and UL723/ASTM E84 Standard for Test for Surface Burning Characteristics of Building Materials.