How To Use Application Tape
Presto Tape’s Application Tapes come in a variety of tack levels and strengths and are color coded that allows you to select which material is right for the job. Here is a step by step process on how to transfer vinyl graphics simply and cleanly. There are also other ways to transfer vinyl graphics.
Step 1: Apply the Application Tape over the vinyl graphic so it covers the entire graphic
Step 2: Using a squeegee, apply pressure moving left and right until Application Tape is adhered to the graphic
Step 3: Holding down the release liner, lift the Application Tape with the vinyl graphics attached
Step 4: Apply the Application Tape with the graphic attached where desired
Step 5: Using the squeegee again, apply pressure moving left and right over the graphic until the graphic is adhered to the surface
Step 6: Lift the corner of the Application Tape and slowly peel it back leaving only the vinyl graphic in place